Conductive PPS plastic Resin 300HSF-35GF-15MC000

The thermal performance index of PPS reinforced with glass fiber is higher. Its maximum continuous use temperature reaches 400 degrees. The mechanical properties of the aluminum alloy decrease little with the increase of temperature, and after 5000 hours of heat aging at 232 degrees, its bending strength and tensile strength can still maintain more than 50%. The tensile strength, bending strength and other properties of PPS are at the middle level among engineering plastics, but the elongation and impact strength are very low. Therefore, when using PPS in stressed components, additives are usually added, such as glass fiber, carbon fiber, filler, etc. To enhance its mechanical properties, after this modification, the main mechanical properties of PPS, such as tensile properties, bending properties, compression and impact strength, are greatly improved, but the elongation is decreased. The modified PPS can Under the action of long-term load and thermal load, it maintains high mechanical properties and dimensional stability. It is insoluble in any known organic solvents when it is lower than 175 degrees. When PPS is in contact with general organic solvents, plastic parts will not crack.

PPS plus short glass fiber (SGF) composite material has the advantages of high strength, high heat resistance, flame retardancy, easy processing, and low cost, and has been applied in the fields of automobiles, electronics, electrical, machinery, instruments, aviation, aerospace, military and other fields .

PPS extended glass fiber (LGF) composite material has the advantages of high toughness, low warpage, fatigue resistance, and good product appearance. It can be used for water heater impellers, pump casings, joints, valves, chemical pump impellers and casings, cooling water impellers and Shells, home appliance parts, etc

Application range：