The obvious feature of PC is that it has high impact resistance, excellent toughness and electrical properties, can be used in the temperature range of -40~180 degrees Celsius, and has small shrinkage and good dimensional stability. Odorless, good transparency, belonging to amorphous thermoplastics. Toughened PC material is a PC material modified by adding a toughening agent, which has the characteristics of high toughness and no cracking.
Toughened PC is mainly divided into ordinary grade toughened PC and high fluidity toughened PC. Ordinary grade toughened PC material can be used in thin-walled products, auto parts, mobile phones and other electronic and electrical products; while high fluidity PC can be used in super Thin-walled parts, such as flat back cover (0.4mm).
Toughened PC material - PC can further improve its comprehensive characteristics through alloy modification with other plastics. For example, in the automotive field, PC/PBT alloys have been widely used many years ago, such as car door panels, It can make up for the strict requirements that PC cannot be painted and baked. There are also applications such as car bumpers, especially in instrument panels, as well as car lampshades, car windows, etc., because this material has good impact resistance and excellent performance. The surface appearance, tasteless, light weight, as automotive interior parts in the future, this material will be more widely developed and applied in the automotive field.
performance item |
test condition [status] |
testing method |
Test Data |
data unit |
|
physical properties |
specific gravity |
|
ASTM D792 |
1.20 |
g/cm3 |
The melt flow rate |
300℃/1.2kg |
ASTM D1238 |
12 |
g/10min |
|
Molding shrinkage |
Flow,3.20mm |
ASTM D955 |
0.50-0.70 |
% |
|
hardness |
Rockwell hardness |
R meter scale |
ASTM D785 |
117 |
|
Mechanical behavior |
Tensile Strength |
Yield,3.20mm |
ASTM D638 |
55.9 |
MPa |
Elongation |
Fracture,3.20mm |
ASTM D638 |
130 |
% |
|
Flexural modulus |
3.20mm |
ASTM D790 |
2060 |
MPa |
|
Bending strength |
Yield,3.20mm |
ASTM D790 |
88.3 |
MPa |
|
Notched impact strength of cantilever beam
|
-30℃ |
ASTM D256 |
55.0 |
J/m |
|
23℃ |
ASTM D256 |
70.0 |
J/m |
Application range:
Name: Jerry Meng
Mobile:+86 18657312116
Tel:+86 0573-82822319
Whatsapp:+86-18657312116
Email:jerry@fulltrustplastic.com
Add:No. 100 Zhuyuan Road, Jiaxing, China