Halogen-free flame retardant PC--General PC materials are in the form of granules or flakes, which can be used for injection molding, structural foam molding and thermoforming, etc. Some PC materials combine the performance of siloxane to obtain a major upgrade. Its excellent Excellent impact resistance, endowing these materials with perfect low temperature ductility. In the range of sharp temperature changes, these materials maintain their excellent performance, and the specially modified PC material has outstanding anti-UV and anti-microbial properties, and can be directly in contact with food during use. PC raw materials are an excellent choice for electronics and other devices that require repeated exposure or adaptability to outdoor environments, offering electrical properties and flame retardancy for a wide range of products based on non-chlorine and non-chlorinated The brominated flame retardant material reaches the strict UL94-V0 level. It is a material with high toughness, impact modification and hydrolysis resistance, which makes its application, such as integrated airbags and components, its excellent Extended performance enables stable airbag deployment without major debris, improving consumer safety. Its high heat and humidity resistance, resistance to bonding, creating stylish and attractive car dashboard designs, is extremely durable and flexible.
Halogen Free Flame Retardant PC - For protective gear, such as helmets, there are usually very strict requirements expected from the material. The design must be functional, and targeted material selection, PC material is undoubtedly a big two points, whether it is a flat or sharp object, even at temperatures well below freezing. The super-tough and cold-resistant PC raw material provides absolute guarantee for your safety, and the material's excellent chemical resistance and excellent coating performance under low temperature conditions make the material's eye-catching appearance design attract consumers' attention. Optimum for a variety of materials in portable electronics and outdoor gear, these PC materials also have inherent release characteristics, which allow handset manufacturers greater design freedom in tight spaces.
performance item |
test condition [status] |
standard test |
Test Data |
data unit |
|
physical properties |
water absorption |
(23℃,24hr) |
ISO 62 |
0.2 |
% |
specific gravity |
|
ISO 1183 |
1.30 |
g/cm³ |
|
melt flow index |
300℃/1.2kg |
ISO 1133 |
46 |
cm³/10min |
|
Mechanical behavior |
Tensile Strength |
23℃ |
ISO 527-2 |
54.0 |
Mpa |
Tensile modulus |
23℃ |
ISO 527-2 |
2700 |
Mpa |
|
Bending strength |
23℃ |
ISO 178 |
89.0 |
Mpa |
|
Flexural modulus |
23℃ |
ISO 178 |
2600 |
Mpa |
|
thermal performance |
Heat distortion temperature |
0.45Mpa without annealing |
ISO 75-2/BF |
134 |
℃ |
Heat distortion temperature |
1.80Mpa without annealing |
ISO 75-2/AF |
117 |
℃ |
Application range:
Name: Jerry Meng
Mobile:+86 18657312116
Tel:+86 0573-82822319
Whatsapp:+86-18657312116
Email:jerry@fulltrustplastic.com
Add:No. 100 Zhuyuan Road, Jiaxing, China