ABS Brief Introduction
We need to know that ABS plastic raw material is a kind of synthetic resin. It is widely used in automobile processing and the manufacture of television appliances. The infrared penetrating ABS plastic raw material we introduce today is a resin material with better performance formed by adding other compounds on the basis of traditional ABS resin materials. Now let's briefly introduce, infrared rays penetrate ABS plastic raw materials.
Traditional ABS plastic raw materials already have relatively good physical and chemical properties. For example, the traditional Ai TV material has good light transmission and is suitable for making plexiglass. Its hardness and operability are relatively high, and it is widely used in industry. However, its environmental adaptability is very poor, and it generally deforms when it is outside 35 degrees below zero to 130 degrees above zero. And if it is in the case of direct sunlight, it is easy to be affected by ultraviolet rays and cause color changes, or changes in physical properties. Therefore, traditional ABS materials are generally only suitable for indoor use.
IR Transmitting ABS
The ABS plastic raw material after adding special substances has inherited the excellent performance of the traditional ABS plastic raw material, and has better stability and some other properties. This is the infrared penetrating ABS plastic material we introduced today. First of all, it can adapt to a wider range of temperatures, and can be used between minus 35 degrees and minus 135 degrees without thermal deformation. The most important thing is that it is okay, the infrared rays penetrate, and the color is not easy to change in nature under outdoor conditions. Therefore, its practicality in daily life is also more extensive.
Infrared penetrating ABS, that is, the ABS plastic material that can be penetrated by infrared rays, is widely used in infrared remote control receivers, infrared sensors, 3D glasses, night vision equipment, remote controls, infrared cameras, infrared set-top boxes, smart home sensing products, security products etc.
The characteristics of infrared penetrating ABS are
Can pass infrared radiation in the desired band;
have as high a transmittance as possible;
High mechanical strength;
Good chemical stability.
Mechanical Properties |
Data |
Comments |
Hardness, Rockwell R |
100 |
ASTM D785 |
Tensile Strength at Break |
37.9 MPa |
ASTM D638 |
Tensile Strength, Yield |
40.7 MPa |
ASTM D638 |
Elongation at Break |
10 % |
ASTM D638 |
Elongation at Yield |
2.2 % |
ASTM D638 |
Tensile Modulus |
2.28 GPa |
ASTM D638 |
Flexural Strength |
62.1 MPa |
ASTM D790 |
Flexural Modulus |
2.38 GPa |
ASTM D790 |
Izod Impact, Notched |
2.14 J/cm |
ASTM D256 |
Izod Impact, Notched (ISO) |
6.30 kJ/m² |
ISO 180/1A |
|
18.9 kJ/m² |
ISO 180/1A |
Charpy Impact, Notched |
1.89 J/cm² |
ISO 179/1eA |
Gardner Impact |
16.9 J |
ASTM D3029 |
Processing Properties |
Data |
Comments |
Rear Barrel Temperature |
|
|
Middle Barrel Temperature |
|
|
Front Barrel Temperature |
|
|
Melt Temperature |
|
|
Mold Temperature |
|
|
Drying Temperature |
|
|
Dry Time |
|
|
Vent Depth |
0.00254 cm |
|
Application range:
Name: Jerry Meng
Mobile:+86 18657312116
Tel:+86 0573-82822319
Whatsapp:+86-18657312116
Email:jerry@fulltrustplastic.com
Add:No. 100 Zhuyuan Road, Jiaxing, China