Virgin ABS resin for automotive

Product Item : 965
Category： ABS Resin
INQUIRY EMAIL

In the automobile industry, with the development of automobile materials towards the direction of visualization, comfort, safety and lightweight, ABS resin is also being constantly developed new ABS modified products to meet the increasingly high requirements of the automobile industry. ABS resin with low VOC, no spraying, high aging resistance and high sensory quality has gradually become the new darling of automotive engineering plastics. Therefore, high performance and multi-function will be the future development direction of automotive ABS.

Automotive ABS materials mainly involve high-end and high-performance ABS materials: heat-resistant ABS, low-odor ABS and alloys, low-gloss ABS alloys, blow molding grade ABS, electroplating grade ABS and antistatic ABS.

The characteristics and application of ABS and its alloys commonly used in automotive interior and exterior decoration parts are as follows:

ABS products	Performance Characteristics	Commonly used interior parts	Commonly used exterior trim parts
Heat resistant ABS	The deformation temperature is 90-105℃, with good heat resistance, toughness and fluidity	Door panel, sub-instrument panel, instrument panel and other decorative parts	Rear view mirror, taillight body and other signal lights
Low odor ABS and alloys	Low voc, reduce air pollution inside the car, improve the air inside the car	Interior parts, door panels, sub-instrument panels, etc	--
Low gloss ABS alloy	Low gloss, commonly used as interior trim to reduce driving fatigue. Common low gloss ABS alloy resin, PC/ABS and PA/ABS alloy	Door top, glove box, air outlet, clock hood, etc	--
Blow/blister grade ABS	It has the advantages of high melt strength, high elongation, and good balance of transverse and longitudinal extension, and can meet the molding requirements of large industrial hollow blow molding products.	Door upholstery, ceiling, trunk, etc	Tail wing (spoiler)
Electroplated grade ABS	Better improve the weather resistance, at the same time can form a variety of appearance, improve the product appearance level	Instrument panel, air outlet decoration ring,CD panel decoration ring, inner door handle, etc	Bumper, grille, tailgate handle, etc.


Physical Properties	Metric	English
Density	1.22 g/cc	0.0441 lb/in³
Linear Mold Shrinkage	0.0030 - 0.0060 cm/cm	0.0030 - 0.0060 in/in
Melt Flow	34 g/10 min	34 g/10 min
Mechanical Properties	Metric	English
Tensile Strength at Break	27.0 MPa	3920 psi
Tensile Strength, Yield	34.0 MPa	4930 psi
Elongation at Break	10 %	10 %
Flexural Strength	54.0 MPa	7830 psi
Flexural Modulus	1.80 GPa	261 ksi
Izod Impact, Notched (ISO)	7.00 kJ/m² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F
	13.0 kJ/m² @Temperature 23.0 °C	6.19 ft-lb/in² @Temperature 73.4 °F
Charpy Impact, Notched	0.700 J/cm² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F
	1.20 J/cm² @Temperature 23.0 °C	5.71 ft-lb/in² @Temperature 73.4 °F