Automobile is an important application industry of engineering plastics. Under the trend of energy saving, environmental protection and lightweight, engineering plastics will gradually expand their application in the automotive field. PA has excellent comprehensive performance, and the price is relatively low. It can also be enhanced and modified by various methods, and its performance is greatly improved. Wide range of applications in the engine room. The use of plastic materials has become one of the symbols to measure the development level of the automobile industry, and polyamide (PA) engineering plastics have become the most important engineering plastics for automobiles.
PA66 is easy to form and process, and the modified and filled high-strength PA66 has excellent heat resistance, impact resistance, rigidity, and good processing fluidity, so nylon materials are suitable for many automotive parts.
High-strength PA66 has the characteristics of high temperature resistance, hydrolysis resistance, and oil and gas resistance. In addition, the price of PA is relatively cheap. These factors make PA an ideal material for automotive parts.
In addition to engine room parts, high-strength PA66 can also be used for other stress-bearing parts of the car, such as: door handles, fuel tank caps, lamp holders, various gears, control switches, airbags, windshield wipers, wheel covers, etc.
performance item |
test condition [status] |
testing method |
Test Data |
data unit |
|
Basic performance |
water absorption |
24 hours soaking (23℃) |
ASTM D-570 |
0.7 |
% |
water absorption |
Saturated (23°C) |
ASTM D-570 |
5.4 |
% |
|
physical properties |
specific gravity |
|
ASTM D-792 |
1.38 |
|
Mechanical behavior |
Rockwell hardness M |
DAM |
ASTM D-785 |
M101 |
|
Tensile Strength |
23℃,DAM |
ASTM D-638 |
196.1 |
MPa |
|
elongation at break |
23℃,DAM |
ASTM D-638 |
3 |
% |
|
thermal performance |
heat distortion temperature |
1.8MPa |
ASTM D-648 |
249 |
℃ |
Coefficient of linear thermal expansion |
|
ASTM D-696 |
2.3×10-5 |
m/m/℃ |
|
melting point |
DAM |
ASTM D-789 |
255 |
℃ |
|
melting point |
50%RH |
ASTM D-789 |
255 |
℃ |
Application range:
Name: Jerry Meng
Mobile:+86 18657312116
Tel:+86 0573-82822319
Whatsapp:+86-18657312116
Email:jerry@fulltrustplastic.com
Add:No. 100 Zhuyuan Road, Jiaxing, China