PEEK has excellent comprehensive properties. PEEK has outstanding high temperature resistance and thermal performance. It can be used for a long time at 250 ° C, and the instantaneous use temperature can reach 315 ° C. PEEK has high rigidity, dimensional stability, and small linear expansion coefficient, which is close to metal aluminum materials. ; PEEK has good chemical stability, strong corrosion resistance, and has flame retardant, radiation resistance and other properties; PEEK has high resistance to sliding wear and fretting wear, especially at 250 ° C. High wear resistance and low friction factor; in addition, PEEK is easy to extrusion and injection molding.
Glass fiber reinforced PEEK material can make up for or improve the lack of PEEK performance, improve the heat resistance and bending resistance of PEEK, improve its processing performance, reduce costs, improve corrosion performance, etc.
Adding glass fiber to PEEK not only reduces the cost of the composite material, but also increases the bending resistance and heat resistance of the composite material. In the automobile industry, because PEEK resin has good friction resistance and mechanical properties, it is used as a raw material for the manufacture of engine inner covers, and various parts such as bearings, gaskets, seals, and clutch rings are used in the transmission and brake of automobiles. And air conditioning systems are widely used.
performance item |
testing method |
Test Conditions |
Test Data |
data unit |
|
physical properties |
density |
ISO 1183 |
crystallize |
1.40 |
g/cm3 |
water absorption |
ISO 62-1 |
24h, 23℃,3.2mm |
0.04 |
% |
|
water absorption |
ISO 62-1 |
saturation, 23℃ |
0.3 |
% |
|
Melt viscosity |
ISO 11443 |
400℃ |
320 |
Pa.s |
|
Mechanical behavior |
Tensile Strength |
ISO 527 |
fracture,23℃ |
250 |
MPa |
elongation at break |
ISO 527 |
23℃ |
1.5 |
% |
|
Tensile modulus |
ISO 527 |
23℃ |
26000 |
MPa |
|
Compressive strength |
ISO 604 |
23℃ |
300 |
MPa |
|
Charpy notched impact strength |
ISO 179/1eA |
23℃ |
6.0 |
kJ/m2 |
|
Charpy Unnotched Impact Strength |
ISO 179/1U |
23℃ |
45 |
kJ/m2 |
|
IZOD notched impact strength |
ISO 180/A |
23℃ |
7.5 |
kJ/m2 |
|
IZOD unnotched impact strength |
ISO 180/U |
23℃ |
40 |
kJ/m2 |
|
Shore hardness |
ISO 868 |
23℃ |
91 |
|
Application range:
Name: Jerry Meng
Mobile:+86 18657312116
Tel:+86 0573-82822319
Whatsapp:+86-18657312116
Email:jerry@fulltrustplastic.com
Add:No. 100 Zhuyuan Road, Jiaxing, China