Description
JY 910RB is a PC Resin grade. Processing method: Injection Molding.
Applications
Primary processing method: Injection Molding.
Product Specification
| Property | Unit | Test conditions | Result | Test Method | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Deansity | kg/m3 | / | 1200 | ISO 1183 | ||||||||||||||||||||
| Molding shrinkage | % | Flow | 0.6 | / | ||||||||||||||||||||
| % | Vertical | 0.8 | / | |||||||||||||||||||||
| Melt Mass-Flow Rate | g/10min | 300℃，1.2kg | 10.0 | ISO 1133 | ||||||||||||||||||||
| Water absorption | % | 23℃ | 0.3 | ISO 62 | ||||||||||||||||||||
| Tensile strength | MPa | 50mm/min | 70.8 | ISO 527-1-2 | ||||||||||||||||||||
| Yield stress | MPa | 50mm/min | 65.5 | ISO 527-1-2 | ||||||||||||||||||||
| Tensile modulus | MPa | 50mm/min | 2300 | ISO 527-1-2 | ||||||||||||||||||||
| Elongation at break | % | 50mm/min | 120.00 | ISO 527-1-2 | ||||||||||||||||||||
| Bending Strength | MPa | 50mm/min | 92 | ISO 178 | ||||||||||||||||||||
| Flexural modulus | MPa | 50mm/min | 2310 | ISO 178 | ||||||||||||||||||||
| Izod Impact Strength | KJ/m2 | 23℃ | 70.3 | ISO 180A | ||||||||||||||||||||
| Fire rating | / | ALL Color0.75mm | V-2 | UL 94 | ||||||||||||||||||||
Typical values should be confirmed against the latest producer-issued TDS before final use.