Description
Tairilac AG15AB is an ABS Resin grade.
Product Specification
| Property | Unit | Specification | Result | Test Method | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specific Gravity | / | 23℃ | 1.04 | ASTM D-792 | ||||||||||||||||||||
| Melt Mass-Flow Rate | g/10min | 220℃ × 10kg | 22 | ASTM D-1238 | ||||||||||||||||||||
| Izod Impact Strength | KJ/m3 | 6.4mm，Notched | 19 | ISO 180 | ||||||||||||||||||||
| Charpy Impact | kJ/m2 | 4mmNotched | 20 | ISO 179 | ||||||||||||||||||||
| Tensile Stress at Yield | MPa | 50mm/min | 47 | ISO 527 | ||||||||||||||||||||
| Flexural Strength | MPa | 2mm/min | 72 | ISO 178 | ||||||||||||||||||||
| Flexural Modulus | MPa | 2mm/min | 2400 | ISO 178 | ||||||||||||||||||||
| Rockwell Hardness (R-Scale) | / | R-scale | 109 | ASTM D-785 | ||||||||||||||||||||
| Vicat Softening Temperature | ℃ | 50N,50℃/h | 91 | ASTM D-1525 | ||||||||||||||||||||
Typical values should be confirmed against the latest producer-issued TDS before final use.